PDA

View Full Version : Port Forwarding problem.


dragonnoob
Mon, 08-14-2006, 05:09 PM
Hi guys, Im dragon (old GW fourms member), this is my new id because i forgot the email i used for dragon. Anyways I have a problem with my ports.

Im using an ActionTec MI-424-WR Router. And i portforwarded ports 1000-Any (err the end of port range) TCP and UDP.

My Utorrent is currently using port 20000. When i check to see if the port is forwarded propery using the Utorrent's provided port checker it says the port isnt forwarded properly. Im using ZoneAlarm Internet Security Suite and i alloted Utorrent and Utoorent's site. and Its still saying that my ports arent forwarded properly.

I hope you guys can help.

Thanks in advance


P.S: Please Seed this if you have it please.http://www.boxtorrents.com/details.php?id=129150
complich8
Mon, 08-14-2006, 08:51 PM
according to what I can see from portforward.com's guide on that router, the "Any" is destination port for a source port. So like, if you wanted to allow traffic that was coming in from port 1000 to any port.

I'd say follow the guide here (http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/Utorrent.htm) for a better idea of what you should be doing.
Zinobi
Tue, 08-15-2006, 02:46 AM
i also have a problem of sorts
when i go to 192.168.1.1 and the the prompt comes up to enter username and password i put in the default (admin in the password and hit enter) but it doesnt work and im pretty sure that the password was not changed. i need some help with this.
sairane
Tue, 08-15-2006, 07:24 AM
ahh well with mine you put admin in the username AND password box, then hit enter. Give that a try :)
Zinobi
Tue, 08-15-2006, 06:40 PM
that doesnt work either :'(
kAi
Tue, 08-15-2006, 10:19 PM
Well, you could reset the router, and put in the default one, which I think is 'admin - password'.
complich8
Tue, 08-15-2006, 10:52 PM
are you sure you're entering the right default password?

... 'cause it's different, depending on the router manufacturer, and such.
Apraxhren
Tue, 08-15-2006, 11:36 PM
It would help to post what brand and model it is.
Zinobi
Wed, 08-16-2006, 01:10 AM
well im using the Linksys WRT54G and the default is just to have admin in the password i could try to reset the modem like kai said...hmmm...